TD Pilot - Charging and LED Status - Tobii Dynavox Global
CUSTOMIZE WITH SHOGUN
Skip to Main Content

TD Pilot - Charging and LED Status

November 15, 2021

Charging the TD Pilot
  1. Connect the Power cable to the Power Connector on the TD Pilot device.
  2. Connect the Power adapter to an electrical outlet and charge the TD Pilot device until the battery is fully charged.
The LED Status
The status LED will shine with three (3) different colors:
  • Fault — Red
  • Charging — Blue
  • Power On — Pulsing green
when the unit is charging, the LED will be blue, regardless of whether the TD Pilot is powered On
or not. If there is a fault, the LED will be red, regardless of any other conditions.